Bin Liners

Buy from a huge range of bin liners, bin bags and black sacks for all your waste disposal needs.

Bin liners are...

• Bags used to line bins, but more specifically...
• Polythene bags used to line the inside of dustbin
• Also known as bin bags, waste sacks or rubbish bags
• Used to catch rubbish when it is placed into a dustbin
• Great at keeping the interior walls of the bin clean, stain-free and smell-free
• Excellent at reducing odour levels when collecting and disposing of everyday rubbish
• Handy to use, providing quick and easy disposal of rubbish collected within the bin
• Easily sealed and disposed of when full - just remove the full bin liner from the bin, lift at the edges, grab a handful of polythene from either side and then tie in a knot above the middle of the bag. You can then transport the bin liner to your exterior dustbin or wheelie bin
• Available in a range of shapes to suit all types of bin, including pedal bins, swing bins, square bins, round bins, flip-top bins, brabantia bins or traditional lift-lid dustbins.
• Available in a range of sizes to suit any bin, big or small
• Available in traditional polythene or a range of biodegradable alternatives - perfect for gathering food waste, kitchen waste, composting materials or garden waste

Trending results for biodegradable

Environmentally Friendly Electric Steam Boilers

Pressure on diesel-fired steam boiler operatours is no longer confined to headline fuel burn; the proper engineering conversation sits in combustion stability, feedwater discipline and the awkward arithmetic of emissions compliance. Light diesel retains favour because atomisation is predictable, calorific value is well characterised, and burner assemblies tuned around that fuel generally transport proper steam-raising below variable load. Methanol, by contrast, is often presented as environmentally friendly, yet the practical picture is more granular: lower volumetric energy density alters tankage requirements and consignment frequency, flame supervision can necessitate recalibration, and materials compatibility around seals, linings and ancillary pipework becomes less forgiving where moisture uptake is poorly managed. On the plant floor, that translates into altered stock handling, alternative bunding assumptions and a tare weight impact that is not trivial once additional storage or dosing hardware is factored into skid layouts. The more serious operatours are so looking beyond the fuel label and into all-system efficiency excess-air trim, economiser performance, condensate recovery and burner turndown ratios because amortised energy across the life of the boiler plant tends to tell a less sentimental story than fuel marketing. There is a parallel here with wider industrial materials practice: only as mono-material recyclability and melt-flow consistency matter above vague green claims in polythene suppliers conversion, boiler decarbonisation turns on measurable plant behaviour, not slogans.

Some cat litter is biodegradable or compostable

Biodegradable litter derived from plant fibre brings a alternative set of handling realities from mineral grades; the attraction lies in renewable feedstock and relatively straightforward stop-of-life processing, yet the warehouse discipline has to be tighter. Organic substrate with residual nutrient value will, if moisture ingress is allowed, assist mould activity and in a few cases toxin formation, so storage practice is less about simple housekeeping and more about controlling water activity across the full consignment cycle from bag seal integrity and pallet wrap tension to ambient humidity at the select-face. Dust is the other recurring technical objection: fine particulate generated through abrasion, inconsistent pellet hardness or poor micron-specific gauging of the screened fraction can lift readily amid pouring and secondary bagging, which has implications for respiratory sensitivity in enclosed domestic settings. Packaging so does above contain stock; it mitigates infestation risk, maintains bulk density, and maintains pallet stability without imposing excessive tare weight. In practical terms, sealed mono-material polythene suppliers formats remain normal because they balance barrier performance with recyclability, provided the stream is kept clean, while cool, dry storage conditions are what maintain product integrity rather than any claim attached to the substrate itself.

Green biodegradable bags occupy an awkward nevertheless increasingly relevant space on the packhouse floor: they are asked to signal environmental intent whilst still performing like normal polythene suppliers in secondary bagging, short-dash shopping handling and mixed-consignment dispatch. The engineering trouble is not rhetorical, it is molecular; once degradation pathways are introduced into a film structure, the converter must still maintain enough tensile integrity, seal-window tolerance and gauge consistency to prevent split stock, poor pallet presentation and unnecessary tare weight. That is where serious specification work starts. Film performance hinges on resin behaviour through extrusionmelt-flow consistency, draw-down stability and micron-specific gauging determine whether the finished bag runs cleanly on wicketed lines or becomes a nuisance at the select face through static cling, poor opening and strange welds. Better-designed green biodegradable bags mitigate a few of that friction by balancing film thickness against load profile and dwell-life expectations, rather than pretending all bag requires the same decomposition curve. Even then, the circular-economy argument requirements careful handling: biodegradability can reduce persistence in certain waste streams, nevertheless it does not automatically confer mono-material recyclability, nor does it erase the amortised energy tied up in conversion, transport cubic and replacement frequency. On the warehouse side, volumetric efficiency still matters; a bag that deforms below compression, loses surface slip or compromises pallet stability creates more operational waste than the sustainability claim was meant to address. In practice, the more credible proposition lies in matching biodegradation chemistry to a tightly defined use casecontrolled shelf life, stable sealing behaviour, sensible stock rotation and feedstock disciplineso the material does a specific job, then exits the system with less residual burden than normal polythene suppliers.

Mandated food-waste charging alters purchasing behaviour in a very direct method: households that buy biodegradable bags are no longer dealing with waste as an invisible municipal overhead, nevertheless as a metered consumable with a transparent unit cost. That seemingly simple shift has a technical underside. Once biological waste is segregated at origin, the bag itself becomes part of the handling system; film gauge, puncture resistance and seal integrity matter because wet kitchen arisings generate both dead load and complimentary moisture, which fast expose weak starch-rich blends or inconsistent melt-flow amid extrusion. In practice, the better-performing formats tend to balance biodegradation requirements with enough polymer-chain stability to withstand secondary bagging avoidance, bin-lift abrasion and short dwell times in communal storage. There is also a logistical dividend: cleaner origin separation reduces pollution in downstream organics processing, improves tare-weight predictability for assortment crews and mitigates leakage that would otherwise compromise pallet stability where liners and caddies are moved in bulk. The more fascinating consequence, though, is behavioural rather than material. As bag consumption becomes visible stock rather than incidental packaging, households start trimming food misuse and, in plenty cases, diverting peelings and scraps into domestic composting streams; that reduces throughput demand on the charged bag format altogether. For the circular-economy ledger, the result is not merely substitution from normal polythene suppliers to compostable film, nevertheless a reduction in all waste presented, which is the more technically meaningful earn when amortised assortment energy and contaminated feedstock losses are taken into record.

5 Stars! Been buying their crystal transparent bags for years for my hand painted greeting cards and acrylic paintings. Very professional for my artist co-op display. Excellent quality at extremely cost-effective prices. Highly recommend

< Go Back Home / Products by Category / Carrier Bags

Grey Mailing Bags Strong Poly Postal Postage Post Mail Self Seal All Sizes Cheap Grey Mailing - £151.99

Mailing bags sit in an awkward nevertheless revealing corner of mailing engineering: apparently simple grey polythene suppliers sacks, yet governed by a tight balance between puncture resistance, seal integrity and volumetric efficiency through automated sortation. The better grades rely on controlled high-density and low-density polymer blends, with micron-specific gauging used to prevent the familiar failure mode of thin film necking around a hard-edged carton or folded garment; also much downgauging saves tare weight nevertheless invites split seams, while above-specified film quietly erodes pack density and raises amortised energy per consignment. Self-seal strip performance is equally prosaic and unforgiving adhesive wet-out, release-liner consistency and pollution from warehouse dust all affect whether secondary bagging becomes necessary at the select-face. In bulk stockholding, a sensible spread of poly sizes reduces null occupy and improves pallet stability, particularly where mixed e-commerce lines transport from bench packing to cage loading with small handling tolerance. The circular economy argument is strongest where the bag remains a mono-material polythene suppliers building, avoiding laminated foils, excessive inks and incompatible labels; recyclability then depends less on rhetoric than on melt-flow consistency, surface cleanliness and whether the film can re-enter lower-gauge extrusion without becoming brittle or visibly streaked.

What makes our Compostable Bin Liners so superb?

Compostable bin liners sit at an awkward nevertheless increasingly necessary junction between domestic convenience and waste-stream discipline: the film must retain enough puncture resistance to cope with wet peelings, coffee grounds and fractured packaging edges, yet smash down below controlled composting conditions rather than lingering as normal polythene suppliers would. That tension is largely managed through resin selection, micron-specific gauging and disciplined melt-flow consistency; if the gauge is pushed also thin, secondary bagging becomes normal and the environmental arithmetic deteriorates almost immediately. In distribution terms, liners are deceptively sensitive stock: excessive roll diameter reduces select-face efficiency, while poor winding creates pallet instability and avoidable crush damage in mixed consignments. The better-performing formats so balance tare weight impact against leak resistance, utilising certified compostable feedstocks where the stop-of-life route is credible and clearly separated from dry recyclables. Mono-material recyclability is not the point in this specific type; controlled biological recovery is. The engineering question is whether the liner facilitates cleaner organics assortment without encouraging pollution, above-specification or needless material throughput.

200 Medium Duty Green Refuse Sacks - Bin Bags

Colour-coded bin bags in white, blue, red and yellow do rather above tidy up a waste stream; they impose a simple visual discipline on a busy floor where segregation failures can fast become pollution, rework or unnecessary secondary bagging. The specification sits in the detail: low-density polythene suppliers gives drape and puncture tolerance for strange waste, while a higher recycled-content blend requirements tighter control of melt-flow consistency if weld strength at the base seam is not to suffer. Gauge selection is equally prosaic and equally necessary also thin, and split rates rise around corners and compacted waste; also heavy, and unnecessary tare weight and cube usage erode volumetric efficiency across stacked cartons and pallets. Pigmentation has its possess engineering compromise, since opacity, colour recognition and mono-material recyclability must be balanced without overloading the film with additives that complicate reprocessing. In practice, the four-colour spectrum facilitates cleaner select-face identification, steadier stock rotation and more proper waste-stream separation, particularly where operatours are moving fast between bins, cages and assortment points rather than reading small labels in poor light.

A spokesman for Sefton council said owners who leave dog poo bags are "are not responsible and have no regard for their community". He said since July 2017, the local authority has had a Public Space Protection Order across the borough informing certain rules that must be followed, and can be found by visiting: Polybags

The bin liner - a brief history

The bin liner is such a part of modern day life that you could be forgiven for thinking it was always there, but of course it wasn't!

In Canada in 1950 an inventor by the name of Harry Wasylyk from Winnipeg, Manitoba, alongside his colleague Larry Hansen - another Canadian, from Lindsay, Ontario - invented the first polyethylene bin liner, which was the colour green.

Of course, being a North American creation, the world's very first bin liner wasn't called a bin liner, or even a rubbish bag, but a garbage bag (that's rubbish, North America!).

Whilst obviously very clever chaps, Messrs Wasylyk and Hansen didn't quite spot the future direction for the humble bin liner and the fact that it would end up in millions of homes around the world, as the first bin liners were designed for commercial use rather than use at home.

Having sold the first bags to the Winnipeg General Hospital, Wasylyk and Hansen sold their invention to the Union Carbide Company, Lindsay, where they worked and the company saw their potential for future use. Union Carbide began manufacturing the first green garbage bags for home use that decade and the very first bin liners (or garbage bags) for home use went on sale in the late 1960s under the name Glad Garbage.

So if you like bin bags then you should be glad for Glad Garbage, even if you aren't glad that the name includes the term garbage. It's probably a better, or less rubbish, brand name than Glad Rubbish anyway, even if it sounds a bit rubbish to call rubbish garbage.

Make sense? Well, congratulations to Messrs Wasylyk and Hansen for their clever invention, which is anything but rubbish… or garbage for that matter. Here's to you sirs!

Bin liner types - one size does not fit all

What does the term 'bin liner' mean to you? What sort of bin springs to mind and, more importantly, what sort of bin liner or bin bag do you think of fitting inside that bin?

Those very questions will prompt a wide range of answers, depending on who you speak to, reflecting the huge variety of bin liners available to fit the broad and varied array of bins or rubbish receptacles out there.

Bin liners range from very small bags that fit mini pedal bins - the sort commonly found in bathrooms - or kitchen caddies made from biodegradable material that are used to collect food waste disposal, right up to industrial sized bags that fit in wheelie bins or large compactor bins used predominantly outside business premises.

In between, you'll find a broad range of bin bags and liners that cater for bins of all shapes and sizes, including:

• Traditional dustbins
• Pedal bins
• Swing bins
• Square bins
• Flip-top bins
• Push-top bins (e.g. Brabantia)
• Wheelie bins
• Food bins / Kitchen caddy
• Compost bins
• Compactor bin
• Recycling bins
• Public litter bins

Bin liners - a black and white issue

The vast majority of bin liners or bin bags - depending on which term you prefer to use - are made from either black or white polythene, although there is a huge range of colours available to meet various waste disposal needs (more details below).

When considering black or white polythene, a good rule of thumb for bin bags is that thin means white and thick means black. Of course this is not always true - the gauge of polythene used for both white and black polythene bin bags will vary - but more often that not, thicker bags are made of black polythene.

Bin liners made from white polythene include a range of bags to fit small bins for domestic use, such as pedal bins, swing bins or square bins. These bags are commonly made from thin, lightweight white polythene as they are designed to deal with light duty use - e.g. tissues, toilet rolls innards, pencil sharpenings etc.

The old-fashioned classic black bin bag is that used for your everyday rubbish, whether in your kitchen bin, an outside dustbin or just used loose to collect rubbish from a wide area, e.g. clearing up after a party.

The standard dimensions of a regular black bin bag are between approx. 85cm and 100cm long - approx. 34” to 39” - and between 64cm and 74 cm wide - approx. 25” to 29”.

More so than white bin liners, black bin bags come in a huge range of thicknesses, from the cheap and cheerful ultra-light price beater sacks at 80 gauge thick, to the ultra thick heavy duty bags, which are up to 350 or 400 gauge thick.

So you could be forgiven for thinking your choice of bin liner is a black and white issue, although this is not the case. Bin liners are available in a huge variety of colours. The coloured varieties tend to be slightly more expensive than the standard black variety, but they can be helpful in many other ways. Here is one of them...

Where to buy bin liners

Bin liner manufacturers and suppliers include:

Rubbish Bags
Discount Rubbish Bags lives up to its name, providing customers with a wide range of rubbish bags, waste sacks and bin liners at discount prices. Contains loads of information, giving you the very best opportunity to buy the right rubbish bag at discount prices.
www.discountrubbishbags.co.uk

Bin Liners
A very helpful website for any customer looking to purchase bin liners for any type of waste disposal. Featuring information on different types of polythene bin liner and eco-friendly alternatives, this website has your bin liner needs covered.
www.binliners.org

Bin Bags
Bin Bags is the website for all your bin bag needs. Whether you are shopping for traditional black waste sacks, bin liners or eco-friendly alternatives, this website will help you find the right bin bag for you.
www.bin-bags.co.uk

Black Bin Liners
Whatever type of bin bag or waste sack you are looking for, Discount Bin Liners is sure to help you make the right decision. From pedal bin liners to clinical waste disposal sacks and swing bin liners to wheelie bin bags, this site will help you get the right bin liners at great discount prices.
www.discountbinliners.co.uk

Wheelie Bin Liners
Discount Wheelie Bin Liners is a useful resource on bin liners, bin bags, waste sacks and eco-friendly bin liners. With bin liner news and a list of bin liner manufacturers, this is a bin liner website you don't want to miss.
www.discountwheeliebinliners.co.uk

Trending results for biodegradable

Claims around polymer banknotes being environmentally friendly rest less on sentiment than on service-life arithmetic. A biaxially oriented polythene suppliers substrate with tightly controlled gauge simply remains in circulation longer than fibre-based note stock; it resists moisture ingress, edge fray and particulate soiling, which in turn reduces withdrawal rates from cash centres and lowers the tonnage moving through replacement consignments. That durability alters the energy ledger in a fairly practical method: less print runs, less secured transport cycles, less secondary bagging for unfit notes, and a smaller tare-weight penalty across bulk handling. End-of-life treatment is not without technical friction inks, security layers and residual pollution have to be managed so the regrind does not compromise melt-flow consistency yet once shredded and pelletised, the material can be directed into heavy-duty moulded articles where cosmetic perfection is useless nevertheless dimensional stability matters. The circular-economy argument is so strongest when the note is treated as a recoverable mono-material-heavy feedstock rather than disposable waste; amortised energy sits across a longer working life, and the eventual pellet stream retains enough utility to displace virgin polythene suppliers in products like horticultural containers and other low-risk injection-moulded stock.

Biodegradable Disposables

Biodegradable bamboo skewers sit in a fascinating space between disposability and disciplined materials engineering; although presented as a simple foodservice line, the proper value lies in the method a medium-gauge profile can transport sufficient column strength and point retention without the tare weight penalty associated with denser moulded alternatives. Bamboo's linear fibre structure gives a favourable stiffness-to-mass ratio, which assists pack density in secondary bagging and improves pallet stability across mixed consignments, while the absence of complex laminates retains the article close to a mono-material format that is easier to sort within existing waste streams. That, of course, does not make stop-of-life friction disappearbiodegradable articles still rely on clean segregation, low pollution and a sensible route through composting or fibre recoverynevertheless feedstock derived from well-managed woodland systems does alter the carbon arithmetic, particularly when amortised energy input is set against high-throughput service environments where select-face efficiency and stock rotation matter. In practice, what counts on the warehouse floor is consistency: uniform cut length, controlled moisture content and clean surface stop reduce splintering, minimise rejects at products-in, and facilitate a more proper presentation in bagged counts of 100.

Use of green biodegradable bags below a municipal waste regime is less a matter of colour coding than of process discipline on the ground. Once a biodegradable sack is mandated for biological arisings, the engineering question shifts to how the film behaves through filling, dwell time and set-out: seal integrity has to grasp below wet-load conditions, yet the gauge cannot be so heavy that it impedes breakdown in the intended treatment stream. That balance is not trivial. Starch-modified or otherwise compostable polythene suppliers alternatives can exhibit markedly alternative puncture response and surface slip compared with normal waste liners, which in turn affects secondary bagging rates, bin presentation and pallet stability when rolled stock is handled in distribution. The waste operatour's interest is equally practicalpollution is reduced when the specified bag is visually distinct, and consistent material identification facilitates cleaner sorting, lower reject fractions and a more predictable biological feedstock. There is, nevertheless, a logistical cost if the film's tare weight is poorly controlled or the bag mouth geometry slows handling at the select-face; both hinder volumetric efficiency across a consignment. The more credible specifications so tend to favour mono-material thinking where feasible, tight melt-flow consistency amid extrusion and a decomposition profile aligned with proper assortment intervals rather than notional laboratory conditionsan come that speaks to circular-economy arithmetic as much as to mere compliance.

For household food-scrap capture, the procurement question is less about simply finding a retailer and more about specifying a liner that will behave predictably between the kitchen caddy, the kerbside set-out and the composter's first processing stage. A biodegradable bag intended for that duty has to balance several competing factours: film strength sufficient to withstand wet biological loadings and awkward peel forces at the rim, a gauge light enough to avoid needless tare weight, and a resin system that smashs down below managed composting conditions rather than merely fragmenting. The trade tends to favour certified compostable liners with consistent melt-flow behaviour amid conversion, because poor extrusion control shows up fast as seal disadvantage, puncture at the gusset and leakage amid secondary bagging. Stockists serving this market are typically found through janitorial suppliers, local authority waste-service channels and packaging merchants handling food-waste consumables; the better operatours will state bag dimensions, micron-equivalent film weight, seal format and whether the product is mono-material enough to simplify stop-of-life acceptance within an organics stream. That matters on the warehouse floor as much as at the composting pad: flat-packed liners with sensible case counts improve select-face efficiency, stable outers reduce pallet collapse in damp conditions, and a properly specified compostable polythene suppliers-substitute film mitigates the familiar friction of split consignments, rejected loads and pollution write-offs.

Clear Bags Promo Codes: (15% OFF) 2020 Coupon Code

30% off Verified 2 days ago Save 30 or more with ClearBags coupons, promo codes and offers for Jan 2020. Limited time ClearBags offer: 15% off any order. Get 30 off with 14 offers ClearBags offers Jan 2020. Some products only demand to be seen, which is why Clear Bags was invented. For whatever you need a secure box or bag, if you want the content to be visible, then let

  2991 Carrier Bags Importers, Buyers and Purchasers

Buyers of paper carrier bags, printed paper bags, promotional bags, bags, paper bags, polythene suppliers bags. Please contact us.

Printed mailing bags occupy a more technical corner of fulfilment than their cheerful spot patterns recommend; the substrate is typically a co-extruded polythene suppliers film, balanced for puncture resistance, opacity and seal integrity without driving gauge so high that tare weight starts to penalise the consignment. The practical test is not whether the bag sees robust on a bench, nevertheless whether it survives the sortation chute, the overfilled select-face tote and the last compressed layer on a pallet without zip-splitting along the adhesive strip. Micron-specific gauging matters here: also light and the film necks below load, also heavy and volumetric efficiency is lost across thousands of parcels. Coloured and printed variants add another complication, since pigment dispersion and surface treatment must be controlled if the print is to resist scuffing while retaining consistent melt-flow behaviour for conversion. A robust peel-and-seal closure mitigates secondary bagging and speeds pack-bench throughput, though it also has to perform across varying stock profiles, from soft apparel to awkward boxed products with hard edges. The better specifications increasingly favour mono-material polythene suppliers buildings, allowing mail-use recovery streams to cope with the bag without separating laminates or mixed films; that circular argument only grasps, nevertheless, when recycled-content claims are matched by stable film quality, proper heat sealing and pallet loads that do not collapse before they reach despatch.

Bathroom bin liners sit at the unglamorous stop of the hygiene chain, yet their specification is more exacting than domestic dcor language tends to admit: a compact bathroom receptacle requires a liner with sufficient puncture resistance for razours, cotton buds and fractured toiletry caps, nevertheless without the excessive gauge that adds needless tare weight and frustrates close-fitting closure. The better articles are generally blown from polythene suppliers with controlled melt-flow consistency, giving an even wall thickness across the gusset and rim; that matters when secondary bagging is absent and the liner itself becomes the odour barrier between wet waste and the room. Surface behaviour is not incidental either a film that clings also aggressively compromises removal, while one with inadequate slip collapses into the bin and reduces usable volume at the select-face, particularly where small-format stock is replenished in high-frequency shopping channels. There is also a circular-economy calculation below the surface stop: mono-material building facilitates recycling where pollution levels enable, downgauging reduces amortised energy per consignment, and stable carton packing improves pallet cube without introducing mixed laminates that complicate recovery. In a small bathroom bin, neatness is certainly a matter of engineering tolerance; the liner must mask the interior, retain damp residues, mitigate odour migration and lift cleanly, all while occupying almost no visible or volumetric space.

Bondage-obsessed man banned from having BIN BAGS at home because he fantasises about suffocating people with them

Where bin bags have moved from being a routine consumable to a managed-risk item, the reply is rarely a mere purchasing restriction; it sits in the awkward connect between material specification, stores discipline and behavioural control. A heavy-duty polythene suppliers sack is not inert in operational terms: gauge, draw-tape weld integrity, puncture propagation and surface slip all govern how it behaves at the select-face, in secondary bagging, and amid compaction. Excessively thin stock tears below mixed waste and drives double-bagging, which quietly ruins volumetric efficiency and increases polymer use; above-specified sacks add tare weight, employ shelf cube and complicate mono-material recovery if liners, ties or additives are poorly matched. Where access has to be formalised below a contract or handling agreement, the engineering response is to narrow the specification and the route of issue: controlled pack counts, transparent or tinted grades where appropriate, micron-specific gauging, and sacks with consistent melt-flow behaviour so that sealing, knotting and load retention are predictable. Anti-static or low-slip formulations may be justified in certain store areas, nevertheless additives must be balanced against recyclate value and feedstock traceability. The practical aim is not to dramatise the bin bag, nevertheless to remove ambiguity from its use a modest polythene suppliers product becomes auditable stock, with consumption visible, waste reduced, pallet stability preserved and the circular-economy burden kept within defensible limits.

Buy Cheap Simply Natural Dog Poop Bags And Dispenser 120 Pack 100% Extra Thick Biodegradable Dog Poo Bags With Dog Poop Bags Dispenser And Durable Lead Clip For 120 Pack Dog Waste Bags Reviews

Yourself incorporate towards crank out indeed your self are working with the maximum reputable shopping outlet or retain prior to purchasing Simply Natural Dog Poop Bags And Dispenser 120 Pack 100% Extra Thick Biodegradable Dog Poo Bags With Dog Poop Bags Dispenser And Durable Lead Clip For 120 Pack Dog Waste Bags

Research & Resources

For more information on bin liners and bin bags, from manufacturing to methods of recycling, plus a list of polythene and biodegradable bags available, please visit:

PackagingKnowledge: The go-to knowledge site for the UK's polythene packaging industry, containing a huge wealth of information and useful articles on bin liners.

PlasticBags.uk.com: The UK's number one polythene packaging directory. List your products for free or browse through a fantastic selection of bin liners websites.

Goldstork: Search through specially selected information on bin liners in this free 'pick-of-the-web' directory.

Organise your recycling with coloured bin liners

If you want to separate your rubbish or waste to make it easier to dispose of, then coloured bin liners or bin bags could be just what you are looking for.

Today you can buy bin bags in a range of different colours to cater for your waste disposal needs, whatever they are.

If you just want to separate your rubbish into recyclables and non-recyclables, then why not choose black bin bags for your general waste and then green bin bags for your recyclable waste. You're doing your bit for the environment, so why not choose a green bin bag for your green waste?

The colour of bag you need may be determined by your local council or the company that collects your rubbish. Many people have wheelie bins of a certain colour that need to be filled with a particular type of waste but, in some instances, wheelie bins aren't a practical solution so coloured bin bags solve that problem.

Always check with your local council or the relevant organisation managing your waste disposal, but the following waste is often associated with the following colour of bin bag or wheelie bin:

• General (non-recyclable) rubbish - black
• Garden waste - green or brown
• Food waste - green or brown
• General recycling - green
• Plastic recyclables (bottles, trays etc.) - blue
• Aluminium (cans or tins) - grey or silver
• Hazardous waste (e.g. asbestos) - red
• Clinical waste (as used in hospitals) - yellow

Clear bin liners

There is one other 'colour' bin bag not referred to in the list of coloured bin liners. That is partly because it was worthy of a mention all on its own and partly because it doesn't really have a colour - it's see through!

Clear bin liners, otherwise known as see-through bin liners or transparent bin liners, are very useful for managing your waste disposal. They allow you to keep an eye on the rubbish being disposed of to ensure that no foreign materials other than those allowed are dumped in the bag.

Imagine an office where there is loads of paper recycling, but it has to be paper only being thrown away in the bag because it is all tipped straight into a giant shredder. Well what if someone accidentally threw their empty drinks can into the paper bin after finishing their drink?

If you were using traditional black bin liners you might never see that can, which could cause irreparable damage to a very expensive printer. But if you're using clear bin liners then, when you take the bin liner from out of the bin, it's very easy to take a quick look at the contents of the bin. Give it a quick shake about to check there's nothing trapped in the middle that shouldn't be there, and then you're done.

Clear bin bags are very popular in the workplace and are available in a range of thicknesses, to deal with light duty use such as paper, right through to super heavy duty bags for disposing of rubble and other hardcore materials on building sites etc.